Kathrein UFS 790sw, UFS 790si manual Manual Search DVB-S SAT

SEARCH FOR CHANNELS

MANUAL SEARCH (DVB-S) SAT

Using the setting “Network search On”, additional transponders, not yet saved can be found by the networking of the transponders. They are then stored and scanned for new channels in the same way as the existing transponders.

Polarisation

Use the  buttons to select which satellites you want to cover with a search.

Use the  buttons to switch to “Transponder” and select the transponder to be covered by the search using the  buttons. You can also manually enter the transponder frequency, the symbol rate and the polarisation in the next three lines using the number pad buttons or using the  buttons.

Use the  buttons to switch to “Network search” and use the  buttons to select whether the additional transponders, not yet saved, found due to the networking of the transponders are also be searched for new channels.

Using the  buttons switch to “Channels to search for” and select whether you want to search only for free-to-air channels, only for encrypted channels or for all channels using the  buttons.

Once you have made all the settings, switch to the last line and start the search using the  button. The displays once the search is complete are identical to those for the automatic search.

52