Kathrein UFS 705sw, UFS 705si manual First Installation Single-cable system Automatic

FIRST INSTALLATION: Single-cable system (Automatic)

If one or more receivers are already present on the system and an additional receiver is to be connected, when assigning the transmission frequency the new receiver make sure that no transmission frequencies are duplicated. No frequency can be used by more than one receiver.

The receiver searches for the transmission channels on your single-cable system and shows in the next display the available transmission channels.

Use the  buttons to select the transmission channel you want and confirm the selection with

the  button.

No frequency can be used by more than one receiver.

The receivers would interfere with each other.

The receiver now reads the existing system data for your single-cable system and configures itself.

The receiver has been successfully registered on your single-cable system. Confirm the display

with the	button. Now press the !				(green)
button.	The receiver automatically				displays
the selection menu for		the	channel	search.
Continue by selecting the		item	(Execute	Channel
search).

If no connection to the single-cable system could be established, you will receive the message “Registration was abortive!”. Check your settings and if necessary call for expert help.

22