Kathrein UFS 705sw, UFS 705si manual Option Selection, Error Signalling, Channel List TV/RADIO

ON-SCREEN DISPLAYS (OSD)

the channels using the  and  buttons. You can also however select the sub-channels of a portal channel directly using the  buttons, without having previously pressed the " (yellow) button.

OPTION SELECTION

Press the " (yellow) button once (twice for portal channels) to view further soundtrack selection options, if these are transmitted by the channel provider. Use

the  buttons to scroll through the available selection options. Pressing the " (yellow) button

again, or pressing the  button exits this display again.

ERROR SIGNALLING

“No or bad signal” indicates that an error has occurred in the reception system or in the receiver settings, or that the transponder is not transmitting.

Check the Sat IF connection and the LNB configuration. If you have changed settings, compare them against the basic settings (provided you had made a note of them as suggested).

CHANNEL LIST – TV/RADIO

Also pay attention to the bars at the bottom of the on- screen display! These provide information on what to do next.

Presschannelthelist. button to access the

Calling this up displays the channel selection/sorting list from which you selected the last channel. At the top right you will see the selected channel list (TV or radio channels) displayed.

Press the # (blue) button to switch between the TV and radio channel lists.

36