In the Search & Scan banner you will see a ‘low battery’ icon, which will disappear only when the batteries are replaced.
When the batteries in your Sky remote control need replacing, insert two AA (MN1500, LR6 or
1.Push the catch on the bottom of the remote control battery cover forward, remove the cover.
2.Remove the old batteries.
3.Be sure to match the + and – marks on the batteries to their respective marks inside the battery compartment.
4.Replace the battery cover, ensuring the bottom catch clicks into place.
Don’t leave flat batteries in your remote control.
Replace both batteries at the same time.
If you leave your Sky remote control without batteries for more than 10 minutes your remote control settings for operating your TV will be lost. After replacing the batteries, you will be able to control your Sky digibox as normal, but you will have to reset your remote control to operate your TV. Refer to the Setting your remote control to operate your TV section on page 40 for further information.
EXTRA INFORMATION
43