Introduction
This chapter will guide you through the initial setup of EvolutionTV. Before proceeding, make sure you have connected EvolutionTV to a USB 2.0 port of your Mac. Also ensure the power supply is connected at all times.
Connect your TV antenna via a coaxial cable or your video source (digital TV receiver for example) via
I.Serial Number and Registration
1.Launch EvolutionTV located in your Applications folder
2.You will be asked to enter your serial number located on the CD sleeve or the CD itself. Enter the 32 digits serial number with the dashes as shown below:
II.Setting up EvolutionTV for TV reception
The Setup Assistant will launch automatically on the first startup of the software. You can access it at anytime via EvolutionTV > Setup Assistant
The EvolutionTV Setup Assistant will guide you through the set up process and create a list of settings based on your choices and hardware configuration.
1.Start by selecting your country. If your country is not in the list, select the relevant TV standard via the ‘Other’ option.
EvolutionTV™ User Guide
Page 10