Shaw ATLAS PVR Universal Remote Control manual Programming Channel Control Lock

2.Press a mode key twice (i.e., AUX, DVD, AUD, TV, or CBL) to clear all the learned keys for that mode. The LED blinks twice.

3.Repeat step 2 for another mode or press and

hold SETUP to exit programming.

PROGRAMMING CHANNEL CONTROL LOCK

By default, the remote control’s channel-control capabilities are locked to the cable converter. The affected keys* are 1 through 0, CH+, CH-, ENTER, and LAST. This will guarantee that you do not inadvertently change a channel on your TV or VCR. However, you can de-activate this feature to allow full access to these keys in the TV and VCR modes.

*NOTE: This feature does not affect the AUD mode.

Unlocking Channel Control

1.On the remote control, press CBL once; it will blink once. Press and hold SETUP until the

CBL key blinks twice.

2.Enter 9 7 3. The CBL key will blink twice.

3.Press CH- once. The CBL key will blink four times.

Now the remote control will provide TV and VCR channel-control capabilities while in the TV or VCR mode.

15