Shaw ATLAS PVR Universal Remote Control manual Device Table, Device Key

KeyFunction

Use PIP ON-OFFto switch the Picture- In-Picture feature on or off (if available on your TV or cable service).

Use PIP SWAP to switch images and sound between the main and window pictures, or to swap tuners on dual- tuner PVRs.

Use PIP MOVE to move the window picture to different positions in the main picture.

Use PIP CH+ (or CH-) to select the next higher (or lower) PIP channel.

In the CBL mode, use VIDEO SOURCE to view other video sources (A or B) instead of cable.

In all other modes, use VIDEO SOURCE to watch TV or video programs on a desired device.

For amplifiers/receivers, use VIDEO SOURCE to select an input source.

Device Table

NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 8 or “Programming TV/VCR Combo Control” on page 10.

After programming, theAtlas PVR Universal Remote Control will be able to control the following types of devices:

Device Key Controls these types of devices

VCR, TV/VCR Combo, PVR (Personal

Video Recorder), or extra PVR Player

DVD Player

Audio Amplifier, Tuner, or Receiver

Television

Cable Box (Converter) or Satellite Receiver, including PVR and VOD controls

7