Using the Installation Template

The Installation Template (IT) included in this kit helps you select the correct positions for drilling the holes for the TV mounting.

Figure 5

Lines for Locating Stud Markings

Line up the installation template with your stud markings to ensure the proper location for your drill holes. After you have the position selected, tape the template in place securely on the wall with masking tape so that you don’t damage the wall surface. Use a level to double check that the screw holes will line up vertically. Drill four evenly spaced holes 2.5" (64mm) deep using a 5/32" (or 4mm) size drill bit. Follow the directions on the installation template carefully.

You must be careful to accurately drill the holes or else the screws may not line up with the holes in your Wall Plate (WP).

Installing the Security Screw

Before you attach the Wall Plate (WP) to the wall, you need to insert the M4 x 10mm Security Screws (AB) into the locking mechanism on each end of the bracket. Insert them only half-way, so that the locking arm can still be easily rotated.

DETAILED VIEW

AB	Figure 6

English