This kit includes the TOGGLER® brand ALLIGATOR® Anchors (U) for mounting in concrete walls, brick, or cinder block. These patented anchors are the finest solid wall anchors on the market and offer excellent holding ability when properly installed.
After the holes are drilled, remove the template and place four ALLIGATOR® Anchors into the concrete wall as shown in Figure 9.
U
Figure 9
After you have prepared the holes for mounting the Wall Plate (WP), install the wall plate by inserting the four Lag Bolts (T) through the mount and into the ALLIGATOR® Anchors (U) as shown in Figures 7 and 10. After checking that the wall plate is level, tighten all lag bolts fully, but be careful not to
Figure 10 | T |
| 3" (76mm) | ||
|
|
|
| ||
|
|
| minimum hole depth | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
U
Concrete
WP
Installing the decorative End Covers
Even though your TV hides most of your |
|
wall mount from view, from the sides you |
|
can probably still see the ends of the |
|
bracket. This kit includes decorative End |
|
Covers (EC) to make your bracket |
|
installation look clean and finished. To |
|
install the end covers, simply line up the |
|
cover with the end of the bracket, and |
|
press into place. Look for two holes in the |
|
frame of the bracket, which the end cover | EC |
inserts into, as shown in Figure 11. |
Figure 11
WP
English