Bell'O 8325, 8315 manual Mounting the TV

Page 16

Mounting the TV

Before you attempt to attach the TV to the wall plate, make sure the adjustable arms are parallel to the TV (in the 0-degree position). This position is indicated by the markings on the arms as shown in Figure 13B. Detailed instructions on how to adjust the arms can be found on page 17.

Figure 13A

When you’re ready to put the TV with the Monitor Arms (MA) onto the Wall Plate (WP) assembly, get a friend or an assistant to help you lift the TV and guide the monitor arms onto the wall plate as shown in Figure 13A.

MA

DETAILED VIEW

WP

Figure 13B

Markings on the adjustable arm will line up when in the 0-degree position.

Make sure the arms are engaged on both the top and bottom rails of the wall plate!

English

Page 15 Page 17
Image 16
Page 15 Page 17
Contents
Page About This Manual Icons Used in This Book IntroductionFoolish Assumptions Precautions Parts Included in This Kit WP 8315 or 8325 Wall Plate 8325 Shown, QuantityAB M4 x 10mm Security Screw Tools You Will Need Attaching the Adjustable Arms Getting ready to hang the TVWho is VESA? Choosing which screws to use for your TVSelected Screw Adjustment Lever Attaching the Monitor ArmsSecuring the Wall Plate Finding the wood studs to mount toDetermining the location of the TV Using the Installation Template Installing the Security ScrewWhen mounting to a wood stud When mounting to solid concrete, bricks, or cinder block LevelInstalling the decorative End Covers Mounting the TV Don’t forget those wiresUnderstanding the locking mechanism Mounting the TV Locking the arms into place Using the tilting arm feature If you need to remove the TVLimited Lifetime Warranty Bell’O International Corporation