ProMounts UAPRO210 manual Installation 3 UA-PRO210

Page 5

INSTALLATION (3) UA-PRO210

 

 

 

Step 5:

 

 

5

Cable Management:

 

 

5.1 To install the cable, first you

 

 

 

 

 

 

need to remove the end cover (I)

 

 

 

and slide the cable cover (J) out

 

 

 

from the arm.

 

 

 

5.2 Do the same for the rest of the

 

 

 

cable covers before installing the

 

 

 

cables.

 

 

 

5.3 Install the cables and slide the

 

 

 

covers back to the arm.

A

I

 

5.4 Install the end covers.

 

 

 

B

J

6

Step 6:

 

Adjusting the Display:

 

6.1 Slight loosen Bolt (A); do not

 

loosen fully or remove it, otherwise

A

injury may occur.

6.2 Grasp the upper and lower

 

H

edge of the Display, and then push

 

or pull the Display to the

 

desired tilt angle.

B

6.3 Tighten Bolt (A).

 

6.4 If necessary, adjust horizon

 

with bolts (H), as in step 4.5.

FOR MORE INFORMATION VISIT

www.promounts.com

ProMountsTM name, logo and model numbers are property of ProMounts.

5

© ProMountsTM 2010

Image 5
Contents UA-PRO210 Disclaimer Step Installation UA-PRO210Step Installation 2 UA-PRO210Installation 3 UA-PRO210