TView Micro SXGA User’s Guide
Inspecting the Equipment
Before installing and connecting the hardware, inspect it for any damage, which may have been incurred during shipment. Perform a thorough inspection, looking for dents, scratches, or loose parts. Look for anything that appears unusual or
Connecting the TView Micro SXGA to an IBM PC or Macintosh Computer
This section describes the steps to connect your TView Micro SXGA to a television or VCR. The following sections describe how to connect to IBM PCs, Macintosh PCs, IBM PC laptops and Note- books, and Macintosh PowerBooks.
Notes: 1. Before performing the steps to connect the TView Micro SXGA to a laptop computer, you must turn on the external video connector. This is accomplished by using a particular key sequence on the keyboard (for example, FN + F11) or through the BIOS setup program. Refer to your laptop owner's manual to determine how the external video connector is turned on.
2.Ensure that you are using a Macintosh PowerBook computer that has a connector for an external monitor.
Chapter 2 | 11 |