FOCUS Enhancements SXGA manual Connecting to the Television Using an RF Modulator

Page 22

TView Micro SXGA User’s Guide

Connecting to the Television Using an RF Modulator

If you do not have a television with composite video or S-Video, you will need a special adapter called an RF Modulator. This device converts the Composite Video signal from the TView Micro SXGA unit to an antenna signal. The RF Modulator is not supplied.

Note: When using an RF Modulator, the TV may have to be set to a particular channel (for instance, 3 or 4) to accept the TView Micro SXGA ’s video. Or, in some cases, you may have to specify input using the TVs on-screen- programming feature. If you are unsure about how to set your television to accept external video through the Antenna In, refer to the television owner’s manual.

To connect the TView Micro SXGA to your television using the RF Modulator, perform the following steps:

1.Connect the RF Modulator to the coaxial input at the rear of the television.

2.Connect one end of the composite video cable to the port labeled "Comp Video" on the side of the TView Micro SXGA unit.

3.Connect the other end of the composite video cable to the RF Modulator’s Composite Input at the rear of the television.

4.Plug RF modulator into wall outlet or surge protector

5.Turn your computer on.

18Hardware Installation

Image 22

Contents TView Micro Sxga User’s Guide FCC Notice Copyright Table of Contents About the User’s Guide Contact Information Notation ConventionsOn-line Features Chapter Introduction∙ 2D Flicker Filter with 8 Levels Presentation Mode Modes of OperationTelevision Only Mode Suggested Uses for the TView Micro Sxga Specifications IBM or compatible System RequirementsMacintosh or compatible Checking the Packing List Packing ListInspecting the Equipment Turn the computer and monitor off State, see function of TView Micro Sxga LED in Chapter Connecting the TView Micro Sxga to a Television Composite Video ConnectionVideo Connection Scart Connection Europe Only Match the port to the connector you are using Connecting to the Television Using an RF Modulator Connecting the TView Micro Sxga to a VCR Connecting the TView Micro Sxga to a VCR Windows 95, 98 & 2000 Installation Windows InstallationWhat’s on the CD ROM? Using the TV Fonts in Windows 95, 98 TV FontsTView Micro Sxga User’s Guide Image Control Screen ControlsZoom Quadrants TView Micro Sxga User’s Guide TView Micro Sxga User’s Guide Auto-Save Memory Function Functions of the TView Micro Sxga LEDColor Meaning To change screen resolutions perform the following steps Dip SwitchesChanging Screen Resolutions Windows 95, 98 = Comp/S-Video or ScartTo change screen resolutions, perform the following steps MacintoshTo activate the Mirroring Mode, perform the following steps Tuning Your Television Using Your Television’s Video SettingsSharpness BrightnessColor Tint or HueTroubleshooting TView Micro Sxga User’s Guide Picture Rolls Returning a Damaged or Failed TView Micro Sxga Unit To return a TView Micro Sxga unit, follow these stepsTView Micro Sxga User’s Guide Page Limited Warranty TView Micro Sxga User’s Guide