Settings & Functions
Main Menu |
Select Service |
TV Guide |
Parental Control |
Installation |
Utility |
_PIN_code_ _
Parental Control
| Censorship classification | No block | |
| Change PIN |
|
|
| Old PIN Code | * * * * |
|
| New PIN Code | * * * * |
|
| Verify Changed PIN Code | * * * * |
|
|
|
|
|
Installation
System Setting
Service Organising
Service Searching
Status
Common Interface
?
?
3. Parental Control
You can set a parental guidance rating to each programme in this mode.
1. When the 
button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN Code will appear on the centre of screen.
** The default PIN Code is 
.
2.Enter the PIN Code on the display window.
(If any problem occurs when entering a PIN Code, you cannot switch to the next mode.)
3.Set the parental guidance rating of highlighted censorship classification.
The parental level is given as
4.To change your PIN Code:
•Select the highlighted Old Pin Code using the 
buttons and then enter your Old PIN Code.
•Enter a New PIN Code in the highlighted New PIN Code
using the 
buttons.
•To verify the New PIN Code,
5.When the entered PIN Code is correct, then all settings are completed. (If the PIN Code is wrong, the message “PIN Code mismatch” will be displayed on the display window. When the
button is pressed at this time, the Old PIN Code is valid and the cursor is located in the first position of this menu.)
4.Installation
This mode allows you to customise, add a new service and displays the state of the STB. Enter the submenus after selecting the Installation mode in the Main Menu.
4-1. System Setting
The System Setting mode supports the STB internal settings according to the connection of the receiver and external units.
This mode includes Language Setting, Time Setting, A/V Output Setting, UHF Tuning and Other Settings.