Humax CI-5100T user manual EN23, Output Setting

English

A/V Output Setting

Video Output	RGB
Audio Output	STEREO
Dolby Digital	OFF
Screen Mode	4:3
Display Format	Letter-box

A/V Output Setting

Video Output (CVBS/S-Video/RGB)

Select one of the following options:

RGB	- if you have connected a scart cable to a standard TV.
CVBS	- if you have connected a scart cable to an old TV that
?	do not have RGB-input.

S-Video - if you have connected to the S-video (SVHS) input on your TV or VCR.

Audio Output

Set the audio mode which is output from the TV SCART and RCA/Cinch Jack. (Stereo/Mono)

Dolby Digital

lf Dolby Digital option is ON and the broadcaster provides the Dolby Digital stream, the Dolby Digital audio language is firstly selected when changing the service.

Screen Mode

Set the screen format of your TV (4:3 or 16:9).

4:3 - Standard TV

16:9 - Wide screen TV

Display Format

Select in witch format the picture should be dislayed on your TV.

If your TV screen format is 4:3 and you view a 16:9 transmission,

Letter-box - the whole picture in its original format will be dis- played with a black filling on the top and bottom of the TV-screen.

Center	- the sides of the movie will be cut off and the central
	part will be shown on the entire TV-screen.
Auto	- your TV-set is in control of the picture display format.

If your TV screen format is 16:9 and you view a 4:3 transmission,

Pillar-box - the whole picture in its original format will be dis- played with black bars filling out the TV-screen on both sides of the picture.

Full	- the picture is expanded so that it covers the whole
	TV-screen. (Creates a slightly deformed appearance)
Auto	- your TV-set is in control of the picture display format.

EN23