7. Installation
7.5Default Setting
Tip:
•The default password is 0000.
•If you have forgotten your password, please contact your local product distributor.
Default Setting enables you to restore the product to the factory default.
Warning: Please note that once you perform Default Setting, all data such as antenna setting information, channel list, and all user configured data will be deleted.
1.Press the MENU button.
2.Select Installation using the / button and press the OK or button.
3.Select Default Setting using the / button and press the OK or button.
4.Select Yes and press the OK button to restore all setting to factory default. To return to the previous menu, select No and press the OK or EXIT button.
5.You will be prompted to enter your password again before starting to load default setting. Enter the password to proceed.
6.When default setting is completed, installation wizard pops up automatically. For detailed information about installation wizard, refer to Chapter 3. Installation Wizard.
GB62
User’s Manual