7. Installation
2.Antenna Setting (Motor Antenna)
When using a motor antenna, press the OPT+ button in antenna setting menu.
Motor Type
1.Select Motor Type using the / button and press the OK or button.
2.Select LNB Frequency using the / button and press the OK or button to select an option. If the required value does not exist, select User Define and enter the LNB frequency directly using the
3.Select Motor Kind using the / button and press the OK or button to select an option.
DiSEqC1.2 General motor antenna using DiSEqC1.2 | |
USALS | Motor antenna using USALS |
Note: When Motor Kind is set as DiSEqC 1.2, both My Longitude and My Latitude are set to Disabled.
4.Select My Longitude using the / button and press the OK or button. Enter my longitude value using the
5.Select My Latitude using the / button and press the OK or button. Enter my latitude value using the
Edit Satellite Data
1.Select Edit Satellite Data using the / button and press the OK or button.
2.Select Satellite using the / button and press the
OK or button. Select a satellite to edit using the OK or button.
3.Select Satellite Alternative using the / button and press the OK or button to add the satellite you set.
4.Select Satellite Longitude using the / button and press the OK or button. Enter my longitude value using the
5.Select Save using the / button and press the OK button.
Note: Satellite Longitude is editable for User Define Satellite only.
GB53
User’s Manual