4 |
FURTHER CONFIGURATION
Firewall Policy Rules
10From the Connections tab, click LAN Settings.
11Select Use a Proxy Server.
12Select Bypass proxy server for local addresses.
13Click OK.
14Click OK again to close the dialog box.
Configure a Firewall Policy Rule for the VCA
1Select Firewall Policy from the ISA Server Manager.
2Select Create New Access Rule from the Tasks tab.
3From the Wizard, give your new rule a name. Click Next.
4Select Allow. Click Next.
5Select All Outbound Traffic. Click Next.
6From Access Rule Sources, click Add.
7Expand the Networks folder and select Local Host. Click Add, then Close.
8Click Next.
9From Access Rule Destinations, click Add.
10Expand the Networks folder and select External. Click Add, then Close.
11Click Next.
12Select All Users (the default) or select the users you wish to have access. Click Next.
13Click Finish.
14Click Apply in the Firewall Policy window.
ALLOW THE REMOTE ADMINISTRATION CLIENT ACCESS
Firstly install the Remote Administration Client (see "Installing the Remote Administration Client" on page 60). Ensure that NetBIOS and RPC are enabled on both the remote computer and the server. Then create the firewall policy rule as set out in the instructions below.
1Select Firewall Policy from the ISA Server Manager.
2Select Create New Access Rule from the Tasks tab.
3From the Wizard, give your new rule a name. Click Next.
4Select Allow. Click Next.
5Select Selected Protocols from the
6From the Add Protocols dialog box, select Protocol from the New menu. The New Protocol Definition Wizard will start.
7Enter a name for your protocol. Click Next.
8From the Primary Connection Information screen, click New.
9Select UDP from the Protocol type
10Select Send from the Direction
66 Starter Guide | SurfControl Web Filter for ISA v5.5 |