2_DTH8060_en.qxd 17/08/05 12:21 Page 12
Connections and initial set up
Adding a channel
If you want to set up a new channel, use the manual search procedure which will enable you to add a channel to the ones already
1.If the main menu is not displayed, press the MENU key.
2.Select the Setup line using the or keys, and press OK to validate.
3.Select the Installation line using the or
4.Select the Manual Search line using the
5.Select your country of residence using the OK.
keys, and press OK to validate.
or keys, and press OK to validate.
or keys on the remote control, and press
A
6.Select your country’s TV standard using the key.
Note: the standards displayed depend on the country selected in step 5.
FRANCE (LL’) for France,
EURO BG (BGH) for Western Europe.
DKK’ for Eastern Europe.
I for the United Kingdom.
7.Select the Reception line using the or keys, and use the key to choose the type of antenna.
•Reception through external antenna: select Antenna (Ch).
•Cable reception: select Cable (Ca).
8.Select the Channel line using the or keys.
9.Press PR+ to start the Manual search.
The search starts.When a channel is found, the picture appears in the background.The channel number is indicated (e.g.: Ch 06).
If the channel is encoded, press AV to display the pictogram next to the channel number. In this case, plug a decoder into the blue AV2 connector of the DVD recorder.
If the picture is poor, select Fine Tuning using or and adjust with PR+ or
10.When the picture and sound of the channel are good, select the line Save using or , and assign a channel number with PR+ or PR- or the number keys. Press OK to store the number that you have assigned to the channel.
The Channel line is once again highlighted to start a new search. Repeat the procedure from step 9 to search for a new channel or press MENU to exit the manual
12