Connections and initial set up
Automatic channel search
In each region,TV stations are broadcast on different channels.Your DVD recorder cannot be factory-set to receive the TV channels of your area.You will have to set up the channels by following the automatic procedure recommended below.
6.Select your country of residence using the 
or keys, and press OK.
Note: the arrows indicate that other countries are available. 
To find your country, use the 
buttons on your remote
control.
7.On the screen that is displayed, the Automatic option is already selected. Press OK.
8.If you connected your devices as indicated on page 4, check that Antenna-Cablehas been allocated to Antenna-Cable, otherwise change the allocation using the 
key on the remote control. For the other selections (AV2,AV3,AV4) leave them allocated to Nothing and continue to step 9.
Note: Other terminal settings (set with the 
/ 
keys).
The AV2-SAT-CABLconnection is intended for a satellite or cable receiver. The installation of a satellite or cable receiver is explained on page 8.
AV3-Frontand AV4 correspond to the IN or INPUT inputs of a device supplying Composite Video signals (CVBS) or S-Video. The Other option is for connection of another device (video recorder…).
Nothing: If no device is connected to the socket concerned.
9.Then select the Done line with the 
key, and press OK.
10.An installation window will appear. A cursor shows the progress in the set-up of the channels.You will need to wait a fair amount of time.When all the channels that you can receive in your area have been stored, 100 % is indicated.The number of channels found is indicated by XX channels found.
Press OK.
Continue on the next page …
Your DVD recorder is equipped with the AV Link. function. This function simplifies channel set-up by downloading them from an AV Link or similar television set (Easy Link, Smart Link, Megalogic, etc.) which is already set up. The channels downloaded in this way keep the same characteristics as those of your TV set (same number, name, etc.).Your DVD recorder’s AV Link downloading function is enabled (factory setting). When first turning on the DVD recorder, if the television is turned on, it will download the channels already installed in your television set. If you wish to de-activate this function, see page 65.
