2_DTH8060_en.qxd 17/08/05 12:22 Page 32
Recording functions
Recording from a connected device
Your DVD recorder allows you to record TV programmes (satellite or cable) or to copy video sequences from a connected device.
From a satellite receiver or cable receiver (AV2 socket)
1.Place a DVD+R or DVD+RW disc in the DVD recorder.
2.From the Main Menu and with the Watch TV function selected, press OK.The images of the last channel watched appear.The information banner is displayed for several seconds.
3.Select the AV2 connector of the DVD recorder using the AV button on the remote control, so that
4.Record by pressing the REC (RECORD) key on the remote control or on the facade.
5.Stop the recording by pressing twice on the STOP key.
From a Camcorder or other device (AV3,AV4 socket)
Your DVD recorder has both RCA
1.Place a DVD+R or DVD+RW disc in the DVD recorder.
2.Place the device in its play mode.
3.From the Main Menu and with the Watch TV function selected, press OK.The images of the last channel watched appear.The information banner is displayed for several seconds.
4.Using the AV button of the remote control while the information banner is displayed, select the AV3 connector if your camcorder is connected to the front of your DVD recorder, or AV4 if it is connected to the
5.Record by pressing the REC key on the remote control or on the facade.
6.Stop the recording by pressing twice on the STOP key.
Note: you can copy films in a single pass without concerning yourself about the content since the Split Title function will afterwards allow you to isolate and then delete any unwanted sequences.You can also create titles of your choice. See page 47.
32