2_DTH311_EN 25/08/03 14:45 Page 27
Further information
There is no sound, or it can hardly be heard
•Ensure that the plugs of the various cables are securely fitted into the sockets.
•If you connect an appliance (such as an amplifier) that includes a DTS or Dolby Digital decoder, check that the input parameters of the appliance are correctly defined.
•According to the type of connection, select the appropriate setting in the sound menu of your player and tick the DTS or Dolby Digital options.
The remote control unit does not work
• Did you press the key corresponding to the appliance to be controlled (DVD,VCR,TV)? Is | EN |
the appliance to be controlled manufactured by a brand other than one in the Thomson |
|
group (Thomson, Brandt, Ferguson, Saba,Telefunken)? |
|
•Point the remote control unit toward the front of the player.The maximum distance from which it can be used is 8 metres. Ensure that there is no obstacle (object, animal) between the remote control unit and the player.
•Remove batteries and hold down one or more keys for several minutes to drain the microprocessor inside the remote to reset it. Reinstall batteries and try remote again.
•The batteries are fully discharged and must be replaced.When you insert the replacement batteries, ensure you align their positive and negative polarities correctly (page 2).
The invalid icon appears on the screen
• Some functions are not accessible because they depend on the disc playing.
The language of subtitles or dialogues is not the one you selected at the time of the initial setup
•When the language of subtitles or dialogues is not available on the disc, a default language is selected automatically.You can select the subtitles or dialogue language through the information banner (INFO key) or the language selection menu on the player.
The menu language is not the one you wanted
•In STOP mode select the Languages menu on the DVD player, then the Player Menu function. Select a language from among those available, OK.
If you forget your password
•Ensure that there is no disc in the player (if necessary press the EJECT key).The player menu must be displayed on the TV screen. Now press the STOP button on your player and hold the CLEAR key on the remote control unit down for two seconds.The code you choose is deleted. Please refer to page 21 to create a new code.
Reconfiguring your player’s initial set-up
•Open the player’s disc tray and ensure that there is no disc on it. Close the tray.The player menu is now displayed on the TV screen. Keep the STOP key on your player pressed down and press the NEXT key on your player for several seconds. All settings you made since the initial set up will be cancelled.The player is reconfigured to the state it was in upon delivery (manufacturer’s settings).
If you switch your player off and then on again, the original choice of languages appears. Refer to page 7 of this booklet to set up the player again.
27