Technicolor - Thomson DTH311 manual Menus on your DVD player basic principles for use, Player menu

2_DTH311_EN 25/08/03 14:45 Page 18

Menus

Menus on your DVD player (basic principles for use)

The functions of your DVD player are not all accessible directly through the remote control or front panel keys. A certain number of functions are accessible through menus that you can display or remove as you wish.These menus are used as follows.

Player menu

The player menu appears when no disc is being played. When a disc is being played, press STOP to stop play. The player menu then appears. Use navigation keys , , on the remote control unit to highlight the desired function.Then press OK to validate your selection and start the function or access the next menu.

The player menu appears when the player

is in STOP mode.

Sub-menus

Sub-menus are indicated by an arrow on the right, telling you that the line shown is not the name of a function but that of another menu.To access it, highlight the name of the sub-menu and press OK on the remote control unit. The sub-menu appears to the right of the previous menu.

The Sound menu is an example of a sub-menu.When the Sound line is highlighted, press OK (the functions of

The Sound menu is an example of a the sound menu appear in another menu). sub-menu.The arrows point to other

available functions

Functions within menus

Lines without arrows are functions that can be accessed directly by validating with the OK key.These functions can be used in two ways:

•The function starts working after validation with the OK key.

The Resume Play function is an example. When Resume play is highlighted, press OK (replay begins and the menu disappears).

•After validation with OK the function offers two choices, usually On and Off.

The Virtual Surround function is an example. When Virtual Surround is highlighted press OK to change the setting from Off to On and vice-versa.

18