Technicolor - Thomson DTH8005 warranty Sockets and cables inputs, Audio inputs Input L, R

RCA sockets and

cables for analogue

L and R audio

signal.

RCA socket and cable for CVBS Video signal, also called Composite.

Ushiden socket and cable for Y/C Video signal, also called S-Video.

Sockets and cables (inputs)

1 - Audio inputs (INPUT L, R)

The analogue sound of an operating device (television set or amplifier) can be input via the 2 Audio sockets L and R of your DTH 8005. If you do not use the recommended connection, i.e. the Peritel (Scart) socket, you must, as well as the video connections (CVBS or S-VIDEO) connect the outputs Audio L and R of the operating device to the Audio L and R inputs of your

DTH 8005.

Note: the audio sockets and cables are generally identified by a colour code (white for the left channel and red for the right).

2 – Video in - Composite (CVBS) (COMPOSITE VIDEO INPUT)

The yellow video socket also known as composite video (or CVBS): the image quality provided by this socket is less than all the other video sockets. Only use this socket if all the other sockets are already in use.

3 - S-Video input (Y/C) (S-VIDEO IN)

The S-Video signal is of a lesser quality than that of the RGB signal supplied by the Peritel (Scart) socket.The S-Video signal however gives a better image quality than the composite video socket (C) since black and white (Y) are separated from colour in the video signal.

Note: do not forget to connect the audio cables since the S-Video cable transmits only images, not sound.