Technicolor - Thomson DTH8005 warranty Automatic channel search

2_DTH8005_en 9/03/04 17:19 Page 5

Connections and initial set up

Automatic channel search

In each region,TV stations are broadcast on different channels.Your DTH 8005 cannot be factory- set to receive the TV channels of your area.You will have to set up the channels by following the automatic procedure recommended below.

6.Select your country of residence using the or keys, and press OK.

Note: the arrows indicate that other countries are available.

To find your country, use the buttons on your remote control.

EN

7.On the screen that is displayed, the Automatic option is already selected. Press OK.

8.An installation window will appear. A cursor shows the progress in the set-up of the channels.You will need to wait a fair amount of time.When all the channels that you can receive in your area have been stored, 100 % is indicated.The number of channels found is indicated by XX channels found.

Press OK.

Continue on the next page …

Note:Your DTH 8005 is equipped with the AV Link. function. This function simplifies channel set-up by downloading them from an AV Link or similar television set (Easy Link, Smart Link, Megalogic, etc.) which is already set up. The channels downloaded in this way keep the same characteristics as those of your TV set (same number, name, etc.).Your DTH 8005’s AV Link downloading function is enabled (factory setting). When first turning on the DTH 8005, if the television is turned on, it will download the channels already installed in your television set. If you wish to de-activate this function, see page 52.

5