Technicolor - Thomson 42PB120S5 PC Mode, Settings, Auto Setup, Setting user formats

Page 15

42PB120S5-EN2 22/03/05 15:37 Page 15

Advanced Functions

PC Mode

1.Switch off the TV set and PC.

2.Connect the PC to the TV set using a video cable (DVI socket on the TV set and a VGA or DVI socket on the PC).

3.Switch the TV set and PC on again. Display the main menu by pressing the MENU button, then select Inputs / PIP, then Main input. Select the appropriate signal source: PC (RGB) (for analogue signals) or PC (DVI) (for digital signals).You can also press the AV button as many times as required to select the desired input.

EN

Settings

Main input:

PC (RGB)

Main input settings

￿

PIP Mode:

Off

￿

 

 

 

H Freq.:

60.0 kHz

V Freq.:

75.0 Hz

Pixel Clk:

78.75 MHz

H / V Pol:

+/-

User timings

￿

Auto Setup

￿

V Pos:

 

V Size:

 

H Size:

 

H Pos:

 

Phase:

 

￿

 

 

 

Display the main menu by pressing the MENU button, select Inputs / PIP, then Main input settings.The first four options in the Main input settings menu are for information purposes only.

Auto Setup

When an analogue video format (RGB) is used for the first time, the TV set carries out an automatic setup: the picture moves back and forth slightly, looking for the best position and picture.

Note: Some computer formats require the picture’s position (horizontal/vertical) and size to be set manually. The result from auto setup depends a great deal on the picture displayed.

To carry out an automatic setup manually, display the main menu by pressing the MENU button, select Inputs / PIP, Main input settings, then Auto Setup.

Setting user formats

H Freq.:

60.0 kHz

V Freq.:

75.0 Hz

Pixel Clk:

78.75 MHz

H / V Pol:

+/-

User timings

￿

Auto Setup

￿

V Pos:

 

V Size:

 

H Size:

 

H Pos:

 

Phase:

 

￿

 

 

 

Position:

1

Recall

￿

Save

￿

Delete all

￿

￿

 

 

 

You can store frequently used formats as user formats.The TV set will detect them and display them immediately in the correct manner, without running the Auto setup function.

1.Display the main menu by pressing the MENU button, select Inputs / PIP, Main input settings, then User timings.

2.You can then, for instance, save the format currently being used in position 1 (8 positions are possible) by selecting Save.

The Recall option allows you to select a user format that has been saved and with Delete all you can delete all stored user formats.

15

Image 15
Contents Contents Getting started TrademarksCompliance with CE standards Batteries InstallationCare and maintenance Getting startedHanging the TV set on the wall Unpacking and installingConnections and Set-up Front panel buttonsConnections and Set-up Switching onTV functions of the remote control Using the remote control for other equipmentNavigating through menus Automatic code search Programming the remote controlProgramming the volume control function Video recorder DVD player Satellite receiver Hi-fi systemDeleting TV channels Channel Set-upInitial set-up Sorting TV channelsChannel Set-up Automatic channel searchManual channel set-up General Operation Freezing a picture General OperationPicture format List of programmesPicture menu functions Picture settingsSound settings Advanced FunctionsInfo Menu Advanced FunctionsPicture in picture PIP Customising your televisionZoom TeletextStop Hidden answersSetting user formats PC ModeSettings Auto SetupOther Information Connecting active speakersConnecting an amplifier Connecting a video recorderOther Information TroubleshootingDisplay Technical specifications