Technicolor - Thomson ITC250 manual Advanced functions, Adjusting the picture, Graphic equaliser

itc250-en 6/04/04 11:57 Page 13

Return

Sound preset

Equaliser

Frequency range

Picture	Return
	Advanced use
	Picture preset
	 Brightness
	Colour
	Contrast
	Contrast expand
	Sharpness
	Auto noise reduction
	Lamp & Position

Picture	Return
	 Brightness
	Colour
	Contrast
	Tone

			Advanced functions
	Graphic equaliser
	Select Graphic equaliser from the Sound menu and press OK to display the menu.
	This menu is used to select a preset parameter and define your own settings using the
Film...	graphic equaliser. It offers the following options:
	Sound preset: use the		buttons to select the appropriate setting for the
	programme you are watching.
	The Personal setting stores your graphic equaliser settings.
	You can access the list of preset sound settings directly by pressing the red button on the
Treble (12 kHz)...	remote control, selecting the Sound preset option and choosing one of the preset				EN
	parameters from the list.Your selection is applied to all channels and AV programmes.
	Frequency range: the graphic equaliser has seven frequency bands. Select each band in
	turn using the	buttons and make the necessary adjustments using the		buttons.
	Press OK to confirm.

Note: When you are setting the graphical equaliser, Personal appears under the Sound preset option.

Press EXIT to close the menu.To return to the Sound menu, select Return and press

OK to confirm.

	Adjusting the picture
	The menus for adjusting the picture are used to obtain the best picture setting according to
	your preference, the type of programme you are watching and the ambient lighting.When
...	you make an adjustment only the selected option remains displayed, allowing you to see the
Personal...	changes taking place on screen. The entire menu is displayed again when you select another
	option or the time for making an adjustment has elapsed.
Medium...	Display the OVERVIEW menu using the MENU button. Select Picture and press OK to
Low...
	confirm.The Picture menu appears with the following options:
...
	Advanced use: this option provides access to the Advanced use menu (see further
	below).
	Picture preset: use the	buttons to select the appropriate setting for the
	programme you are watching.
	Personal contains the values you have defined for the settings Brightness, Colour,
	Contrast and Sharpness.
	You can access the list of preset picture settings directly by pressing the red button on the
	remote control, selecting the Picture preset option and choosing one of the preset
	parameters from the list.Your selection is applied to all channels.You must, however, select a
	preset parameter for each AV programme.
	Note:This function is not available in PIP Split screen mode.
	Brightness, Colour, Contrast, Sharpness: adjust these settings as required.
	Note:These settings are automatically stored under Personal under the Picture preset
	option.
	Contrast expand: can be used to adjust the picture according to the ambient
	brightness. Select an option from the list using the		buttons.
	Auto noise reduction: improves the quality of the picture in the case of poor
	reception. Select an option from the list using the		buttons.
	Note:This function is only available for certain audio-visual sources.
	Lamp & Position: this option provides access to the Lamp & Position menu (see
	further below).
	Some menu options are not available in PIP Split screen mode (see opposite).
	Press EXIT to close the menu.To return to the OVERVIEW menu, select Return and
Warm...	press OK to confirm.

13