Technicolor - Thomson ITC250 manual Lamp & Position, Use

EN

To adjust the vertical position of the picture, press  or .

Advanced use

Select the Advanced use option from the Picture menu and press OK to display the menu.The options are the following:

Automatic format: automatically applies the appropriate format to the picture. Check this box by pressing OK to enable this function.

Tone: adjusts the colour temperature. Select an option from the list using the buttons.

Auto skin tone: improves skin tone rendering. Check the box to enable this function by pressing OK.

Note:This function is only available for NTSC audio-visual sources.

Tint: is used to adjust the picture’s tint.

Note:This function is only available for NTSC audio-visual sources.

Photo Mode: improves quality and stability of still pictures.When this function is enabled still pictures are detected automatically and their resolution enhanced. Check the box to enable this function by pressing OK.

Note:This function is only available for certain audio-visual sources.

Film mode: detects that the programme being broadcast is a film and enhances picture

quality. Select an option from the list using the buttons: Off: function disabled,

On: detection,

Advanced: detection, then enhancement of picture quality.

Note:The Advanced option is selected by default.

Press EXIT to close the menu.To return to the Picture menu, select Return and press OK to confirm.

Lamp & Position

Select the Lamp & Position option from the Picture menu and press OK to display the menu.The options are the following:

Lamp brightness: this function is used to adjust the lamp brightness. Select an option

from the list using the buttons.

Note:The Boosted option increases brightness but reduces lamp life.

The help text also indicates the relevant lamp type for your set.

Write down here the lamp type for future reference:

Horizontal position: use the buttons to move the picture horizontally on the screen.

Vertical position: use the buttons to move the picture vertically on the screen.

Note:You can adjust the vertical and horizontal positions for each source.

Press EXIT to close the menu.To return to the Picture menu, select Return and press OK to confirm.