install |
| Return |
|
| Standard | I... | |
|
| ||
|
| Reception | Aerial... |
Manual | Channel search | CH 01 | |
| Store on programme | 01 | |
|
| Fine tuning |
|
|
| Name | BBC1 |
|
| Decoder | None... |
Use the / keys, or enter the channel number.
Channel set-up
Manual channel set-up
Follow the procedure given on this page if you find that some channels have not been stored during the initial
Display the OVERVIEW menu by pressing the MENU button. Select the Installation option and press OK to confirm. Select the Installation option from the Install menu and press OK to confirm.
EN
1.Select your country using the 
buttons. Press OK to confirm.The Connections screen appears. Press OK to continue.The Installation menu appears. Select the
Manual installation option and press OK.
Define all the settings in turn for each channel to be stored. Follow the instructions appearing at the bottom of the screen.
2.Select the Standard option. Use the 
or 
button to select the standard for your country.
Note:The following standards are available to choose from: I for the UK and Ireland, France for France and Luxembourg, DKK’ for Eastern Europe, the Middle East and Asia, EURO BG for Western Europe, Australia and New Zealand.
3.Select the Reception option. Select the reception method for the channels (aerial or cable network) using the 
or 
button.
4.Select the Channel search option. Enter the number of the reception channel or
use the 
buttons to find the channels.When a channel has been found the picture is displayed.
5.If the picture is not clear you can adjust the setting.You do this by selecting the Fine
tuning option and adjusting it with the 
buttons.
6.If the channel is recognised, its name is detected automatically, otherwise change the
name suggested or enter a name.To do so, go to the name with only its initial letter in
yellow. Choose the character to be changed using the 
buttons. Scroll through the
alphabet using the 1 and 2 buttons. Go to the next character using the 
buttons.
7.If the channel is encoded and you want to connect a decoder to the AV1 socket, select the Decoder option and select AV1 using the 
or 
button.
8.Then select the Store on programme option and enter the number to be assigned to this channel using the numeric buttons (for instance, for BBC1 type 01). Press OK.
Important: Whenever you change a value in the Manual install menu, the Store on programme option starts flashing. To confirm your change you need to select the Store on programme option and press OK. If you do not confirm the change it will be cancelled when you change channels or put the TV set in standby.
Repeat this procedure to find other channels.
Notes:
-For cable networks, to search for missing channels, select Other instead of a country, then select Auto update in the Installation menu.
-If you wish to go through the whole initial 
+ buttons on the television until the menu displays. Proceed as for the initial
-Subsequent
-The Auto update function allows you to set up channels just launched or any channels that are missing or wrongly set up.
-The Auto installation function is used for setting up channels after the initial
This process deletes all channels previously stored. To set up a new channel, it is better to use Auto update or Manual installation.
9