Advanced functions
AV settings
Return |
|
AV1 name | DECOD. |
AV1 video input | RGB... |
AV2 name | VCR1 |
AV2 video input | |
AV3 name | CAMCOR |
AV3 video input | Video... |
CMP name | CMP _ _ _ |
HDMI name | HDMI _ _ |
Configuring AV sockets
You can configure your TV set according to the equipment you connect to it.
Display the OVERVIEW menu by pressing the MENU button. Select the Installation option and press OK to confirm.The Installation menu appears. Select the AV settings option and press OK to confirm. Follow the messages on screen and the instructions below explaining how to configure the AV sockets.
AV1 name: use the 
buttons to select from the list the name of the equipment connected to this socket. If the factory preset names do not suit you, select AV1_ _ _ and enter another one, following the screen messages.
Select the name of the device connected to AV1.
AV1 video input: use the buttons to select from the list the type of video signal transmitted by the equipment connected to the AV1 socket.
Note: Select RGB if no picture is displayed when you connect a games console.
EN
Repeat the same procedure to configure the AV2 socket.
AV3 name: use the 
buttons to select from the list the name of the device connected to the AV3 sockets. If none of the devices in the list is appropriate, select AV3 _ _ _ and enter the name of the device following the instructions on the screen.
AV3 video input: use the 
buttons to select from the list the type of video signal transmitted by the equipment connected to the AV3 sockets.
CMP name: use the 
buttons to select from the list the name of the device connected to this socket. If none of the devices in the list is appropriate, select CMP_ _ _ and enter another one, following the instructions on the screen.
HDMI name: use the 
buttons to select from the list the name of the device connected to this socket. If none of the devices in the list is appropriate, select HDMI _ _ and enter the name of the device following the instructions on the screen.
Press EXIT to close the menu. Select the option Return and press OK to return to the Installation menu.
17