Advanced functions
EN
Picture
Return
Brightness
Colour
Contrast
Tone | Neutral |
Phase
Clock
Vertical position
Horizontal position
PC mode
Other settings
Return |
|
Photo Mode |
|
Film mode | On... |
NTSC tint | |
Automatic format |
|
In PC mode you can access a number of specific functions:
Phase, Clock: adjust these settings as required using the 
buttons in order to enhance picture quality.
Vertical position: use the 
buttons to move the picture vertically on the screen.
Horizontal position: use the 
buttons to move the picture horizontally on the screen.
Other settings
Note:This menu is only available for TV channels and AV programmes.
Select the Other settings option from the Picture menu and press OK.The Other settings menu appears with the following options:
Photo Mode: improves quality and stability of still pictures.When this function is enabled still pictures are detected automatically and their resolution enhanced. Check the box by pressing OK to enable this function.
Note:This function is only available for certain
Film mode: detects that the programme being broadcast is a film and enhances picture
quality. Select an option from the list using the 
buttons.
Notes:
-The Advanced option is selected by default.
-This function is only available for certain
NTSC tint: is used to adjust the picture’s tint. Adjust these settings as required using the 
buttons.
Note:This function is only available for NTSC
Automatic format: automatically applies the appropriate format to the picture. Check the box by pressing OK to enable this function.
Note:This function is only available for certain
Press EXIT to close the menu.To return to the Picture menu, select Return and press OK to confirm.
12