Technicolor - Thomson IFC130 manual Channel set-up, Manual channel set-up, Belarussian Greek

IFC130-P_EN 5/08/05 9:48 Page 7

Channel set-up

Manual Installation

Return
Standard	 I...
Reception	Aerial...
Channel search	CH 10
Fine tuning
Store on number	01
Channel name	BBC1
Decoder

Manual channel set-up

Follow the procedure given on this page if you find that some channels have not been stored during the initial set-up.This can happen if you are setting up cable network channels. Setting up channels manually requires every setting for a particular channel to be entered, one at a time.

Display the OVERVIEW menu by pressing the MENU button. Select the Installation option and press OK to confirm. Select the Manual installation option from the Installation menu and press OK to confirm.

Teletext char. set 1...

Choose you standard, then select reception.

1. Select the Standard option. Use the buttons to select the standard for your country.

Note:The following standards are available to choose from: I for the UK and Ireland, France for France and Luxembourg, DKK’ for Eastern Europe, the Middle East and Asia, EURO BG for Western Europe, Australia for Australia, and New Zealand for New Zealand.

EN

2.Select the Reception option. Select the reception method for the channels (aerial or

cable network) using the buttons.

3.Select the Channel search option. Enter the number of the reception channel or

use the buttons to find the channels.When a channel has been found the picture is displayed.

4.If the picture is not clear you can adjust the setting.You do this by selecting the Fine

tuning option and adjusting it with the buttons.

5.Select the Channel name option and choose a name from the list using the buttons. If none of the names available is suitable select CH _ _ _ _. Use the

buttons to select a character from the list made up of the letters in the standard

alphabet, the numbers 0 to 9 and certain punctuation symbols. Use the buttons to go to another character. Press OK to confirm.

6.If the channel is encoded and you want to connect a decoder to the AV1 socket, select the Decoder option and check the box by pressing OK.

7.Then select the Teletext char. set option and choose the character set that will be

used for Teletext on this channel using the		buttons.The following character sets
are available:
1:Western Europe	5:Arabic
2: Eastern Europe	6: Ukrainian
3: Russian and Bulgarian	7: Belarussian

4: Greek

8.Then select the Store on number option and enter the number to be assigned to this channel using the numeric buttons (for instance, for BBC1 type 01). Press OK. Important: Whenever you change a value in the Manual Installation menu, the Store on number option starts flashing. To confirm your change you need to select the Store on number option and press OK. If you do not confirm the change it will be cancelled when you change channels or put the TV set in standby.

Repeat this procedure to find other channels.

Notes:

-For cable networks, to search for missing channels, select Other instead of a country, then select Automatic update in the Automatic installation menu.

-If you wish to go through the whole initial set-up process, put the TV in standby mode, then hold down the VOL  button on the television and the MENU button on the remote control until the menu displays. Proceed as for the initial set-up.

-Subsequent set-ups:

-The Automatic update function allows you to set up channels just launched or any channels that are missing or wrongly set up.

-The Automatic search function is used for setting up channels after the initial set-up (e.g. after moving house). This process deletes all channels previously stored. To set up a new channel, it is better to use Automatic update or Manual Installation.

7