2_DTH720_en 22/06/04 11:25 Page 10
Remote control
The remote control handset supplied with your DTH 720 is a 3 in 1 type remote control. It allows 3 devices to be controlled: your DTH 720, a television set and a satellite or cable receiver. Thus you have remote control of all these devices by using the 3 modes: DVD,TV or SAT.CABLE that are accessed by 3 corresponding keys.This page describes the keys that control your DTH 720 (in DVD mode).
Note: the functions described below depend on the discs and/or the files read.
For description of the TV and SAT.CABLE functions, see the following page.
Description of keys in DVD mode
Signal lamp - this shows the status of the remote control when it is being used to program or to control another device. It also indicates that the batteries level is low by flashing several times when a key is pressed.
DVD
PR 
RETURN
MENU
CLEAR
OPEN.CLOSE ZOOM
INFO
GUIDE
ANGLE
0 to 9
REV
PLAY
FWD
STOP
PAUSE
AGAIN
ADVANCE LIVE REC TV•VIDEO
Switches the DTH 720 on or off.
Sets the remote control unit in DVD mode (by pressing once), enabling you to control your DTH 720.
Skips forward or backward a chapter (DVD) or track (CD).
Returns to the previous menu.
Displays the DVD disc menu while a disc is being played.
Removes the menu or banner showing on the TV screen.
To remove a disc.
Enlarges the picture during playback, slow motion or pause mode.
Displays the DTH 720 information banner on the TV screen while a disc is being played.
Displays a
To access a choice of angles of an image if available on the disc.
(JPEG) To rotate an image through 90°.
Keys used to enter information such as a chapter or track number, or to make choices from menus.
Fast backward while a disc is being played. Plays a disc.
Fast forward while a disc is being played.
Stops disc playing or recording and displays the DVD player menu.
Pause during playback (CD) or pause on an image (DVD).
Skips backward – each press replays the last seconds during DVD playback.
Not used.
10