Technicolor - Thomson DTH720 manual Connecting DVD player + TV set + VCR, Continue on

2_DTH720_en 22/06/04 11:25 Page 3

Connections and initial set up

The rear panel of your television set and your video player may be different from the ones illustrated here.

		Television set
		4
		United Kingdom	5
		Ireland
			Continental
			Europe
3		Video recorder
		220 - 240 V
	2	50 Hz

EN

DTH 720

Connecting: DVD player + TV set + VCR

1

If you are only connecting your player to your television set, only carry out the connections shown in stages 1 and 5. If no Scart-Peritel socket is available on the TV set consult your retailer. If you already have a VCR the connections shown in stages 3 and 4 should, in most cases, already be in place.

Recommended Audio – Video connections

1.Connect a Scart-Peritel cable (not supplied) to the TV AUDIO VIDEO OUT (RGB) output socket at the rear of your DVD player and to the AV1 input socket of your television set (sometimes called AUX 1 or EXT 1).

2.Plug your VCR Scart-Peritel cable into the VCR/SAT/AUX/AUDIO/VIDEO IN socket on your DVD player and into the TV socket on your VCR.

3.Plug the outside aerial or the network into the aerial in socket (IN ) on the VCR.

4.Use a coaxial cable to connect the aerial out socket on the VCR (OUT ) and the aerial in socket ( ) on your TV set.

5.Plug the mains plug of your player into a mains socket.

Note: for UK, please see safety information regarding the mains plug at the end of this user manual, in the cover page.

Continue on page 9

3