2_DTH720_en 22/06/04 11:26 Page 29
Menus
PAL or NTSC TV sets
If the picture on the DVD being played appear in black and white on your TV screen, the standard of the video signals transmitted to your TV is incorrect. Change the video signal from PAL to NTSC or vice versa.
Select PAL/NTSC then with the OK key choose PAL or NTSC.
PAL is the name of the colour coding system used in most European countries.
NTSC is the name of the colour coding system used in the United States and some other countries.
Scart output
See the paragraph below on Progressive Scan.
EN
Front Display menu
Depending on the brightness of the room where you’ve installed your player, select one of the 4 settings to adapt the brightness of the display panel to suit its environment.
1.If a disc is being played, press STOP (the player menu appears).
2.Press 
to highlight Display and press OK (The Display menu appears giving a choice of options).
3.Press 
to highlight Front Display and press OK (The Front Display menu appears giving a choice of options).
4.Use keys 
or 
to highlight one of the four available options and press OK to validate your choice.
•Always Bright,
•Always Dim.
•Dim for Movies (dimmed lighting during replay of a disc),
•Off for Movies (no display during replay of a disc),
5.To return to the player menu, press 
until the menu is displayed on the screen.
Progressive Scan
To display images on a TV, or monitor (plasma, LCD...) equipped with a Progressive Scan function, you must start this function on your player after having connected your TV to the 3 COMPONENT connectors (Y, Pr, Pb) of your player.
1.If a disc is being played, press STOP (the player menu appears).
2.Press 
to highlight Display and press OK (The Display menu appears giving a choice of options).
3.Press the 
key to highlight Scart output and press the OK key.
4.Use the 
or 
keys to highlight YUV and press the OK key to confirm your selection. Note: the terms YUV, COMPONENTE (COMPONENT), and Y, Pr, Pb all designate the same function.The designation is different according to the context (video signal, type of video output, connector names).
5.Return to the Display menu by pressing the 
key once.
6.Use the 
or 
keys to highlight Progressive Scan and press the OK key to confirm your selection.
7.To return to the player menu, press the 
key until the menu is displayed on the screen.
29