Samsung SV-7000W manual Using the Tape Counter, 00000

00407A)SV-7000W-GB-4_sea 7/24/01 11:20 AM Page 37

Using the Tape Counter

The tape counter:

◆indicates the elapsed time in the play and record modes (hours, minutes and seconds) ;

◆is reset when a cassette is inserted in the VCR ; and

◆enables you to find the beginning of a sequence easily.

☛To enable the remaining time to be calculated correctly, you must indicate the type of cassette being used. See page 22.

GB

EX REC.SPEED CLK/COUNT 2 TIMER

STROBE AUDIO

2 3

ART INPUT

1Insert a cassette in your VCR.

2Press CLK/COUNT twice.

Result: The tape counter is displayed:

0:00:00.

➢The tape counter does not necessarily start from zero at the beginning of the tape.

3Select the required operation (play, record, fast-forward, rewind). Result: The tape counter indicates how long the cassette has

been running.

4To set the tape counter to zero at the beginning of a sequence:

◆press DISPLAY twice to display the counter ; and

◆press CLR/RST when you want to set the tape counter to zero.

5To fast-forward or rewind to the sequence at which the counter was set to zero, simply press REW ( ) or F.F ( ).

Result: The VCR stops automatically when the counter reaches zero.

➢Some VCR information, such as the counter, can be displayed on the television screen (unless you have deactivated the OSD mode; refer to page 17).

Press DISPLAY:

◆once to display the current function, program number, recording speed, date, time and counter ;

◆twice to display the counter only ;

◆three times to display the time remaining on the cassette ; and

◆four times to clear the display.

100	CLR/RST
	0
	PLA Y	4
W		F.
RE		F
REC	STOP	P/STILL
	4
DISPLAY	MONITOR	A.DUB
		0:00:00

37