Samsung SV-7000W manual Audio Dubbing a Pre-recorded Cassette

00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 44

Audio Dubbing a Pre-recorded Cassette

GB

		LINE 1 IN
VIDEO		L	AUDIO	R
INPUT
AUTO		NTSC
PAL	SECAM				RE
PAL-N	PAL-M
2				STROBE	AUDIO
		3
				ART	INPUT
5		6
					CH
8		9			4
	CLR/RST
0
	0
			PLAY
W					F.
RE					F
5					6
REC			STOP
DISPLAY		MONITOR			A.DUB
INPUT					OUTPUT

REC	STOP	P/STILL
DISPLAY	MONITOR	A.DUB
		7
NPUT		OUTPUT

REC	STOP	11	P/STILL
	MONITOR	10	.DUB
	10
INPUT			OUTPUT

With the Audio Dubbing function, you erase the previously recorded sound and replace it with a new soundtrack from:

◆a CD player ;

◆a microphone connected to a sound system ; or

◆a cassette player.

Note:

Audio dubbing is applicable only to the linear audio track .

1Connect an RCA audio cable to the appropriate output on your sound system (CD/cassette player for example).

2Connect the other end of the RCA audio cable to the audio input connectors (L+R) on the front of your VCR.

3Insert the pre-recorded video cassette on which the audio track is to be replaced.

4Select the LINE 1 input by pressing INPUT until LI is displayed.

5Locate the point on the cassette at which you wish to start dubbing.

6Press P/STILL ( ).

7Press A.DUB.

Result: Your VCR is now in the Audio Dubbing Pause mode.

8On the sound system, locate the point on the CD or cassette at which you wish to start playback.

Example: The track that you wish to record on the cassette.

9Press the pause button on your sound system.

10When you are ready:

◆start playback on the sound system ; and

◆press REC or P/STILL ( ) on the remote control.

Result: The soundtrack is replaced on the pre-recorded video cassette.

11When you have finished recording, press STOP ( ).

44