Samsung SV-7000W manual Troubleshooting Guide, Problem Explanation/Solution

Page 52

00407A)SV-7000W-GB-5_sea 7/24/01 11:22 AM Page 48

Troubleshooting Guide

GB

Before contacting Samsung authorized service center, perform the following simple checks.

Problem

 

Explanation/Solution

 

 

 

No power.

Check that the power plug is connected to a wall outlet.

 

Have you pressed the VCR POWER button?

 

 

 

You cannot insert a video cassette.

A video cassette can only be inserted with the window

 

 

side up and the safety tab facing you.

Check that the VCR has not been safety-locked (LOCK displayed). If so, hold P/STILL ( ) down for at least five seconds to release it.

The television program was not recorded.

Check the VCR/antenna connections.

Is the VCR tuner properly set?

Check if the safety tab is intact on the cassette.

Timer recording was unsuccessful.Was the VCR POWER button pressed to activate the timer?

Re-check the recording start/stop time settings.

If there was a power failure or interruption during timer recording, the recording will have been cancelled.

Check that the channel number selected with the Timer Program code is correct.

No playback picture or the picture is distorted.

Press the TRACKING buttons ( or ).

Check to see if you are using a pre-recorded tape.

Check the playback system in the USER SET Menu.

Check the SQPB in the Front Panel. (See page 31)

You cannot see normal broadcasts.

Check that the source selected using the INPUT button is the VCR’s tuner.

Check the TV.VCR/antenna connections.

Noise bar or streaks on playback.

Press the TRACKING buttons ( or ) to minimize this effect.

 

 

 

 

No operation when the:

Check that tape is not already fully wound.

• REW button is pressed ; or

 

• F.F button is pressed.

 

 

 

 

 

When the P/STILL (

 

) button is pressed

A still picture may have “noise bars”, depending on the

 

during playback, the still picture has severe

condition of the tape. Press the TRACKING buttons

“noise bar” streaks.

( or ) to minimize this effect.

 

 

 

 

Incorrect operations or no display.

Use a pencil to press the RESET button and re-initialize

 

 

 

the VCR. All preset data is lost.

 

 

 

 

If you are unable to solve the problem after reading the above instructions, note:

the model and serial number on the rear of your VCR ;

the warranty information ; and

a clear description of the problem.

Then contact your nearest SAMSUNG authorized service center.

48

Image 52
Contents Worldwide Video Cassette Recorder Important Safety Instructions NEC-NATIONAL Electrical Code III Quick Look-Up Guide To record a Program nowContents Strobe ART Monitor Orld B Roadcast S Ystems Nternational S Ervice N EtworkSafety Instructions This Unit is not for USE in Industrial EnvironmentsGetting Started EUROPE... AmericaFront View of the VCR Rear View of the VCRDisplay Indicators Infrared Remote ControlWorldwide TV Color System Worldwide VCR BackgroundNtsc NTSC4.43 PAL-M PAL-N Secam Mesecam Multi-System VCR vs Worldwide VCR With a Multi-System VCRReset Channel System Conversion with the Worldwide VCRTape Conversion with the Worldwide VCR Any VHS Tape00407ASV-7000W-GB-1sea 24/01 Connector Location Type Deciding How to Connect Your VCRRecommended Use Connecting Your VCR to the TV Inserting the Batteries in the Remote Control Plug and Initial SettingUser SET1 Setting User SET2 SettingTo turn On-Screen Information on/off Setting the Date and TimePress or , until Setting the VCR RF out System CHINA, CISSetting the RF OUT Channel Initial setting of the RF OUT channel is offPresetting the Stations Automatically Press the Menu button on the remote controlPresetting the Stations Manually If youSelecting the Cassette Type Selecting the Recording SpeedProtecting a Recorded Cassette E180/T120 E240/T160 300 E260/T180Stopping a Recording Temporarily Recording a ProgramStill Recording a Program with Automatic Stop Using the Timer Programming Feature To select the standard timerVCR Plus+ Recording America Only VCR Plus+ Set up America Only Checking a Preset Recording Cancelling a Preset RecordingSelecting the Play System Mode Playing a CassettePress EjectReceiving Stereo Broadcasts Receiving SAP BroadcastsAdjusting Picture Alignment Manually Sqpb Super VHS Quasi PlayBackAdjusting Picture Sharpness Selecting the Audio Output ModeOption Description MIXPlaying a Cassette in Slow Motion Rewinding and Fast-forwarding a CassetteREW Playing a Sequence Frame by Frame Playing a Sequence at Variable SpeedsLP on On NTSC/PALStrobe Searching for a Specific Sequence Seq EtcUsing the Tape Counter 00000Using the Assemble Edit Function Camcorder Connecting Other Equipment to Your VCRStereo sound system Recording from Another VCR or Camcorder TV System Conversion Playback ConversionConversion Recording InputHi-Fi Audio System TunerSimulcast Line 1 LIAudio Dubbing a Pre-recorded Cassette Recording an FM Simulcast Program Resetting Your VCR Locking Your VCRTechnical Specifications Troubleshooting Guide Problem Explanation/SolutionGlossary of Terms Ntsc PAL Secam World Broadcast SystemsCountry International Service Network Electronics

SV-7000W specifications

The Samsung SV-7000W is a cutting-edge product that exemplifies Samsung's commitment to innovation and technology in the realm of home appliances. This smart vacuum cleaner is ingeniously designed to combine efficiency with user-friendly features, making it an essential addition to any modern household.

One of the standout features of the SV-7000W is its powerful suction capability. Equipped with a high-performance motor, it ensures that dust and dirt are effectively removed from both hard floors and carpets. The vacuum's advanced cyclonic technology separates dirt from the air, maintaining strong suction throughout the cleaning process, which is perfect for users with pets or allergies.

The SV-7000W also boasts smart technology integration, allowing users to control the device through their smartphones via the Samsung SmartThings app. This feature offers convenience, enabling you to start, stop, or schedule cleaning sessions remotely. The cleaner can be easily connected to your home Wi-Fi network, facilitating real-time updates and enabling the user to receive notifications about cleaning status.

Another highlight of the SV-7000W is its versatile cleaning modes. Whether you need a quick clean or an intensive deep clean, this vacuum provides various modes tailored to different needs. The device's sensors enable it to navigate intricate spaces, efficiently avoiding obstacles and ensuring it covers the entire area without missing spots.

The SV-7000W also comes equipped with a high-efficiency particulate air (HEPA) filter. This feature is particularly beneficial for individuals with allergies or respiratory issues, as it effectively traps 99.97% of particles, including allergens, ensuring the air remains clean and healthy.

Additionally, the design of the Samsung SV-7000W emphasizes ease of use. Its lightweight structure and ergonomic handle make maneuvering simple, while its compact size allows for easy storage. The vacuum’s dustbin is also designed for straightforward cleaning, featuring a one-touch release mechanism, which helps in maintaining hygiene without messy spills.

The Samsung SV-7000W represents a perfect fusion of advanced technology, efficiency, and modern design, making it a suitable choice for anyone looking to enhance their home cleaning experience. It not only simplifies the cleaning process but also represents a significant step forward in the evolution of home robotics.