Samsung SV-5000W Playback Conversion, You can convert the input signal into the desired TV system

Page 24

Recording from Another VCR or Camcorder

TV System Conversion

B

 

2

 

2

STROBE

AUDIO

3

 

 

ART

INPUT

5

6

 

 

 

CH

8

9

4

 

0

CLR/RST

 

 

 

 

PLAY

 

W

 

F.

RE

 

F

REC

STOP

P/STILL

 

 

6

MONITOR

A.DUB

 

PLAY

 

You can copy a cassette to your VCR from another video source such as another VCR or a camcorder.

☛It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.

1Connect the VCR from which the cassette is to be copied to the appropriate RCA audio and video input connectors on the front of your VCR, as indicated on page 40, 41.

➢If the other video source does not supply stereo sound, connect only the left audio input (L).

You can also use a SCART cable to connect to the EURO AV on the rear of your VCR.

2Insert a blank cassette in your VCR.

3Insert the pre-recorded cassette in the other video source (VCR or camcorder).

4Press the INPUT button to select the appropriate input on your VCR:

◆ LINE 1 or LINE 2 ; or ◆ AV for the EURO AV.

5Start playing back the cassette to be copied.

6Press the REC button for at least one second to start recording on your VCR.

7When you have finished recording, press STOP ( ) on both VCRs.

You can convert the input signal into the desired TV system.

1Connect the RCA audio/video cable into the LINE 1 IN jacks on the front of the VCR.

2Press the INPUT SYSTEM button of the remote control to select the input signal identification.

◆When the Auto mode is selected, the input signal is automatically identified.

◆When the input signal is not automatically identified, select the corresponding input system manually.

3If you wish to convert the NTSC system into the PAL system, select AUTO or NTSC system with the INPUT SYSTEM button on the remote control.

Result: The display panel shows the NTSC input signal and the NTSC output signal.

◆If the input signal does not correspond to the input system of the VCR, an abnormal signal is outputted.

4Press the PAL output button on the VCR.

Result: The display panel shows the NTSC input signal and the PAL output signal, and the NTSC signal is converted into the PAL signal for output.

GB

 

LINE 1 IN

VIDEO

L AUDIO R

INPUT

2

SYSTEM

 

OK

THROUGH

 

NTSC

REW

 

4

PAL

SECAM

PAL-M

P/S

W

 

F.

RE

 

F

REC

STOP

P/STILL

➢ If you wish to view the cassette being copied:

◆ your VCR must be connected as usual to the

Playback Conversion

 

 

7

DISPLAY

MONITOR

A.DUB

television (see page 12 for further details) ; and

◆ you must select the television AV input.

You can perform playback conversion of the signal recorded on the tape into the appropriate format for the country.

1If you wish to convert the PAL system tape into the NTSC system for playback, then press the NTSC output button on the VCR. Result: The display panel shows NTSC output signal.

2Insert the video tape into the VCR.

◆ is shown on the display panel.

◆A video tape without the record protect (safety) tab intact will playback automatically.

3Press the PLAY ( ) button.

Result: TV system recorded on the tape is automatically read, and the PAL signal is converted into the NTSC signal for playback.

THROUGH

1

NTSC

PAL

SECAM

REW

3

F.F

42

43

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Video Cassette Recorder Contents Safety Instructions Getting StartedThis Device is not for USE in Industrial Environments Background to the Worldwide VCR Worldwide TV Color SystemMulti-System VCR vs Worldwide VCR Comparison of TV color systemsInput Output Deciding How to Connect Up Your VCR Connector Location Type Direction Recommended UseScart LinePlug and Initial Setting An outdoor aerial An indoor aerial Cable television networkUser SET1 Setting Setting the Date and Time User SET2 SettingTuning System Displaying/Hiding On-Screen InformationPress or , until Setting the VCR RF out System CHINA, CIS❿ RF OUT CH Presetting the Stations Manually Clearing a Preset Station If you ThenSelecting the Recording Speed Protecting a Recorded CassetteStopping a Recording Temporarily Source. If you have not done so, refer to pages 19Programmes You can stop recording temporarily pause mode, to avoidUsing the Timer Programming Feature Auto Tape Speed SelectWhole programme VIDEOPLUS+Modifying VIDEOPLUS+/SHOWVIEW Programming Please refer toIf you wish to Then Checking a Preset Recording Playing a Cassette StopSTANDBY/ON Eject Auto PAL Secam MesecamSqpb Super VHS Quasi Playback Adjusting Picture Sharpness Option DescriptionMIX MonoNo sound is heard when playing back frame by frame Playing a Sequence at Variable SpeedsPlaying a Cassette in Slow Motion You can play a cassette in slow motionYou can see discrete image in succession You can see the art image like a pictureRecording Searching for a Specific Sequence PrevNext Etc Seq Seq EtcUsing the Tape Counter Using the Assemble Edit Function Press DisplayFront of the VCR Stereo sound systemYou can convert the input signal into the desired TV system Playback ConversionYou must select the television AV input Convert Recording Hi-Fi Audio System TunerSimulcast Euro AV AVIf you wish to view the pictures being recorded CHAResetting Your VCR Technical Specifications Locking Your VCRCannot insert or play a cassette Problems and Solutions Problem Explanation/SolutionFront View of the VCR Rear View of the VCRDisplay Indicators Infrared Remote Control World Broadcast SystemsNtsc PAL Secam CountryInternational Service Network
Top Page Image Contents