Yamaha DVD-S2500 1Menu Language see, 2Default Audio see, 3Default Subtitle see, 4TV shape see

Preparation

1Menu Language (see page 17)

You can select the language displayed in the On-screen menu.

1Go to [Menu Language] (Setup ➔ Language ➔ Menu Language) by using k n l h buttons on the remote control, then press h.

➜ Choices are displayed on the right column.

2Select a language to be displayed in the On-screen menu by using k n buttons.

3Press l to return to the previous menu.

2Default Audio (see page 17)

You can select the audio language spoken in video discs. Available choices are determined by the disc.

1Go to [Default Audio] (Setup ➔ Language ➔ Default Audio) by using k n l h buttons on the remote control, then press h.

➜ Choices are displayed on the right column.

2Select a language by using k n buttons.

3Press l to return to the previous menu.

3Default Subtitle (see page 17)

You can select the subtitle language set as default. Available choices are determined by the disc.

1Go to [Default subtitle] (Setup ➔ Language ➔ Default subtitle) by using k n l h buttons on the remote control, then press h.

➜ Choices are displayed on the right column.

2Select a default subtitle language by using k n buttons.

3Press l to return to the previous menu.

4TV shape (see page 15)

You can select the aspect ratio of the video displayed on the TV monitor.

Select [Widescreen] if you connect to a wide-screen monitor. If you connect to a conventional monitor, select [4:3 panscan] (the left and right sides are trimmed when you play 16:9 video) or [4:3 letterbox] (black areas appear at the top and bottom when you play 16:9 video).

1Go to [TV shape] (Setup ➔ TV ➔ TV shape) by using knlhbuttons on the remote control, then press h. ➜ Choices are displayed on the right column.

2Make a choice by using k n buttons.

3Press l to return to the previous menu.

5Analog output (see page 16)

Enables you to specify the type of analog output suitable for your AV receiver. Select [Multi-channel] if you are using a multi-channel AV receiver with 6-ch discrete inputs. If your AV receiver does not have 6-ch discrete inputs, select one of [Stereo], [Dolby Surr Compat], or [3D sound].

1Go to [Analog output] (Setup ➔ Audio Menu ➔ Analog output) by using k n l h buttons on the remote control, then press h.

➜ Choices are displayed on the right column.

2Select an item for the analog output signal by using kn buttons.

3Press l to return to the previous menu.

6Digital output (see page 16)

Enables you to specify the type of digital output suitable for your AV receiver. Select [PCM only] if your AV receiver is not capable of decoding multi-channel audio. Select [All] if you connected this unit’s digital out jacks to a multi-channel AV receiver.

1Go to [Digital output] (Setup ➔ Audio Menu ➔ Digital output) by using k n l h buttons on the remote control, then press h.

➜ Choices are displayed on the right column.

2Select an item for the digital output signal by using kn buttons.

3Press l to return to the previous menu.

Notes:

– Press ON SCREEN again to exit from the On-screen menu.

– You can find the selection of the helpful menu items in [Preference] and [Setup].

Go to [Preference] if you want to customize this unit for your personal requirement such as the Wake-up timer.

Go to [Setup] if you want to set the operational status of this unit.

English

11