On-screen menu
Slide Show
Use this feature for JPEG slide show playback.
Picture time
Sets the duration for each image.
Choices: Slow, Medium, Fast
Initial setting: Medium
Setup 
Access
Disc lock
This function enables you to restrict others from accessing certain discs.
If this setting is on, you need to enter the
Choices: On, Off
Initial setting: Off
Change PIN
Enables you to change the
To change the
Enter PIN
Enter the
Parental level
DVD movies may contain scenes that are unsuitable for children. Therefore, some discs contain parental control information that may apply to the entire disc or to certain scenes. Ratings are
Choices: 0 to 8
Initial setting: 0
Country
Selects a country to apply its rating system to Parental Level control.
Features
PBC
A VCD menu screen is displayed when this setting is on. Choices: On, Off
Initial setting: On
Sleeptimer
Places this unit in standby mode when playback is stopped and this unit is not operate for 20 minutes.
Choices: On, Off
Initial setting: Off
TV
TV shape
If you connect to a conventional 4:3 aspect TV, select [4:3 panscan] (the left and right sides are trimmed when you play 16:9 video) or [4:3 letterbox] (black areas appear at the top and bottom when you play 16:9 video). Select [Widescreen] if you connect to a
Choices: 4:3 panscan, 4:3 letterbox, Widescreen
Initial setting: 4:3 panscan
4:3 panscan
4:3 letterbox
Widescreen
TV System (NTSC/PAL conversion)
Allows you to select [PAL], [NTSC] or [Auto] mode to match your TV system. You can play PAL discs on NTSC monitor, and NTSC discs on PAL monitor. The initial setting is [NTSC] (U.S.A. model), [PAL] (U.K., Europe and Australia models).
Choices: PAL, NTSC, Auto
The following conversions are supported.
Disc |
| Output format | ||
| Selected mode | |||
Format |
| |||
NTSC |
| PAL | AUTO | |
|
| |||
NTSC | NTSC |
| PAL | NTSC |
|
|
|
|
|
PAL | NTSC |
| PAL | PAL |
|
|
|
|
|
Notes:
–In progressive scan mode, the output signals from the VIDEO and S VIDEO jacks are same as the format of the disc you play.
–Some image distortion occurs when switching the NTSC and PAL mode.
–If your TV does not accept the selected mode while you change the [TV System] setting, the screen will be distorted so that you cannot recognize the On- screen menu. When it occurs, you can change the [TV System] settings by the remote control operations. Follow the procedures below.
•Choosing [PAL]:
Press “PLAY” ➔ “2” ➔ “5” ➔ “6” ➔ “PLAY” on the remote control.
•Choosing [NTSC]:
Press “PLAY” ➔ “2” ➔ “5” ➔ “7” ➔ “PLAY”
on the remote control.
Do not perform this operation while playing back a disc on this unit.
English
15