Changing the Channels Stored in Memory
Although the Model 28 automatically stores all active channels in your area the first time you turn it on, you can manually program the tuner’s memory.
Note: If you tune both TV (broadcast) and CATV (cable TV) signals, you can store both types of channels.
1.Press MENU on the remote control to select the main menu. The menu appears on the TV screen.
2.Press 4 on the remote control to select CHANNEL SET UP. The channel set up menu appears on the TV screen.
3.Press 2 to select AUTO PRESET. The Model 28’s tuner scans through the chan- nels (TV or CATV) and stores all the active channels in your area. CH and the currently tuned channel number appear on the TV screen. After scanning all the channels, the tuner stops on the
4.To review the saved channels, repeatedly
press CH 
or CH 
.
Note: You can directly select channels that are not stored in the tuner’s memory by using the re- mote control’s number buttons. See “Selecting Channels” on Page 20.
Adding/Erasing Channels
If a channel you want was not stored, or if a channel you do not want was stored, follow these steps to add or erase it.
1.Press CH 
or CH 
or use the number keys on the remote control to enter the channel number you want to add or erase.
Note: Precede a
2.Press MENU on the remote control to select the main menu. The menu appears on the TV screen.
3.Press 4 on the remote control to select CHANNEL SET UP. The channel set up menu appears on the TV screen.
4.Press 3 on the remote control to select ADD/DELETE CH. The TV screen shows ADD/DELETE CH, the currently tuned channel’s number, and the input source (TV or CATV).
5.Repeatedly press ADD/DELETE on the remote control until the channel number for the channel changes to blue (to add the channel) or to red (to delete the channel).
ADD/DELETE CH
23 ( TV )
6.Press MENU on the remote control to save the changes.
SELECTING THE INPUT SIGNAL
Depending on the type of input device (antenna or cable) connected to your Model 28, you must select the input signal (the source you want the Model 28 to tune).
1.Press MENU on the remote control to select the main menu. The menu appears on the TV screen.
2.Press 4 on the remote control to select CHANNEL SET UP. The menu appears on the TV screen.
-CHANNEL SET UP -
1 TV/CATV | [ TV ] |
2 AUTO PRESET
3 ADD/DELETE CH
18