Notes:
•If you press ADD/DELETE after selecting the program number (the program num- ber flashes), the Model 28 clears the timer program screen and deletes any settings you entered.
•After you make a tape speed selection, pressing SELECT causes the timer pro- gram screen to disappear and stores any settings you entered.
6.Press POWER to turn off the Model 28. The TIMER REC indicator turns on.
Clearing an Automatic Timer
1.Press POWER to turn on the Model 28.
2.Press MENU. The main menu appears on the TV screen.
3.Press 1 on the remote control to select
TIMER PROGRAMMING. The timer pro- gram screen appears on the TV screen.
Note: If the timer recording is already in progress, press MONITOR on the remote control then press STOP/EJECT on the Model 28.
4.Use the number buttons
PROGRAM NUMBER 1
DATE | 02/15 THU |
START TIME | 10:28 AM |
END TIME | 11:28 AM |
CHANNEL | 07 |
TAPE SPEED | SP |
5.Press ADD/DELETE on the remote control to clear the program timer.
6.To clear another program timer, select the timer number then press ADD/DELETE again to clear it.
7.Press MENU to exit the screen.
TODAY TIMER RECORDING (TIMER NUMBER 8)
The Model 28’s today timer (stored in program timer number 8) lets you quickly program the Model 28 to start and stop recording within the next 24 hours.
Note: You cannot set a today timer while you are recording a program.
Setting the Today Timer
You must use the buttons on the front of the Model 28 to set the today timer. You cannot use the remote control.
Note: Before you start, be sure you set the Mod- el 28’s clock to the correct date and time (see “Setting the Clock” on Page 19). If you have not yet set the clock, the Model 28 automatically en- ters the clock setting mode before it displays the today timer program screen.
1.Insert a blank cassette, or one you want to record over, into the cassette compartment. The Model 28 automatically turns on.
2.Press MONITOR. The today timer program screen appears on the TV screen.
- TODAY TIMER -
DATE | 02/15 THU |
START TIME | 10:28 AM |
END TIME | - |
CHANNEL | 07 |
TAPE SPEED | SP |
This screen displays the same information as you see on the automatic timer program screen (except the program number). The current date appears on the DATE line and the current time appears on the START TIME line. The current start time hour flashes.
33