Dubbing a Tape
Note: For the best results while dubbing, hold the remote control close to the Model 28’s infra- red window when you press a button. Other- wise, the remote control might affect the dubbing source’s operation.
1.Prepare the dubbing source.
2.Insert a blank cassette, or one that you want to record over, into the Model 28’s cassette compartment. The Model 28 turns on.
3.Enter 00 using the remote control’s number
buttons, or press CHANNEL 
or CHAN-
NEL 
to select one channel higher than the highest programmed channel or one channel lower than the lowest programmed channel. AUX appears on the Model 28’s TV screen.
4.Repeatedly press SPEED on the remote control until the desired recording speed (SP, LP, or SLP) appears.
5.Press REC/OTR on the Model 28 or RECORD on the remote control to begin recording.
6.Start the dubbing source.
7.To turn off the Model 28’s TV screen, press
MONITOR.
8.Press STOP on the remote control or STOP/ EJECT on the front of the Model 28 to stop recording before it automatically stops at the end of the tape. Then stop the dubbing source.
36