Yamaha DVD-E600 owner manual Basic Playback, General Operation, Video control during playback

Operation

Basic Playback

1Press STANDBY/ON on the front panel to turn on the DVD player.

2Press / (OPEN/CLOSE) on the front panel to open disc loading tray.

3Place the chosen disc in the tray, with the label facing up.

4Press / (OPEN/CLOSE) again to close the tray.

➜After recognizing this disc, the player begin to playback automatically.

➜If you press PLAY when the tray is open, this unit closes the tray and starts playback.

Notes:

–DVDs may have a region code. Your player will not play discs that have a region code different from the region code of your player.

–If ‘DISC LOCK’ is set to LOCK and the disc inserted is not authorized, the 6-digit code must be entered and/or the disc must be authorized (see ‘DISC LOCK’).

General Operation

Note: All instructions set out below refer to the remote control, unless otherwise stated.

Video control during playback

STOP DVD VCD CD SVCD

1You can resume the play from the point at which you stopped last time, if you just press STOP once. It will start from the beginning if you press STOP twice to stop playback.

PAUSE/STEP DVD VCD CD SVCD

1To get a still picture, press PAUSE during playback.

2To step forward to the next frame picture, press PAUSE again.

➜ It resumes to the normal playback for CD.

3To resume normal playback, press PLAY.

SKIP DVD VCD CD SVCD

1Press !1 or 2@ briefly during playback to go to the next chapter/track or to return to the beginning of the currect chapter/track respectively.

2Press !1 twice briefly to step back to the previous chapter/track.

3To go directly to any chapter/track, enter the chapter/ track number using the numeric buttons and press ENTER/OK.

Note: Long press of the !1 or 2@ till switch on backward or forward search.

SEARCH DVD VCD CD SVCD

1To search the contents in fast speed, press 2or 1for fast forward/backward searching.

2Press 2 or 1 again to increase the speed for searching.

3Press PLAY to return to normal playback.

Slow Motion

DVD

1To get a slow motion effect during playback, press 3 or

4.

2Press 3 or 4 again, you can get different playback forward/backward speeds.

3Press PLAY to return to normal play back.

VCD SVCD

1To get a slow motion effect during playback, press 4.

2Press 4 again, you can get different playback forward speeds.

3Press PLAY to return to normal play back.

Note: The SLOW BACKWARD function is not available for VCD/Super VCD discs.

Audio control during playback

MUTE DVD VCD CD SVCD

1Press MUTE to disable the sound output.

2Press MUTE again to deactivate the mute.

Audio channel selection

VCD CD SVCD

1Super VCD has two stereo audio channels which are used for playing karaoke or the audio language selection. (for instance, you can choose one channel for only the music background of the song while you play the karaoke.)

2Press AUDIO to select the audio channels you want.

3VCD has only one stereo audio channel, you can select STEREO, MONO LEFT, MONO RIGHT or MIX-MONO by pressing AUDIO.

➜STEREO: Output the left and right audio channels of the disc through the left and right audio jacks accordingly.

➜MONO LEFT: Output the left audio channels of the disc through the left and right audio jacks.

➜MONO RIGHT: Output the right audio channels of the disc through the left and right audio jacks.

➜MIX-MONO: each of the audio jacks can output the same audio effect as stereo.

8