Setup Menu
DIGITAL AUDIO SETUP
In this menu, you can set up the digital audio output signal from the digital jacks, such as coaxial etc.
DIGITAL OUTPUT
1Press 34 to highlight DIGITAL OUTPUT.
2Enter its submenu by pressing 2.
3Press 34 to highlight the selected item.
➜All: Original digital signals output.
➜PCM Only: If your receiver is
4Press ENTER/OK.
5Press 1 and return to the Audio Setup Page.
Note: If DIGITAL OUTPUT is set to “ALL”, all audio settings except MUTE are invalid.
LPCM OUTPUT
In this menu, you can select PCM digital output between 48kHz and 96kHz.
1Press 34 to highlight the “LPCM OUTPUT”.
2Enter its submenu by pressing 2.
3Move the cursor by pressing 34to highlight the selected item.
➜48K: 96kHz (if available on disc) PCM data stream will be converted to 48kHz.
➜96K: If the 96kHz disc is copy protected, the digital output will be muted to comply with the standards.
4Press ENTER/OK.
5Press 1 to return to the Audio Setup Page.
EQUALIZER (Sound Mode)
The “EQUALIZER” allows you to select from various preset modes that control the frequency bands of sound to optimize certain musical styles.
It greatly enhances the excitement and enjoyment of your favourite music.
1Press 34 to highlight the “EQUALIZER”.
2Enter its submenu “SOUND MODE” by pressing 2.
3Press 2.
4Move the cursor by pressing 34to highlight the selected item.
➜ NONE: Play the disc under the original sound effect.
5Press ENTER/OK.
6Press 1 to return to the Audio Setup Page.
Note: The sound may be distorted if the selected sound mode is incompatible with the disc contents.
In that case, select another sound mode or “NONE”.
3D (REVERB MODE)
The “3D” can simulate the echoes and frequency response of some particular places so as to make you feel like personally on the place. The choices are OFF, CONCERT, LIVING ROOM, HALL, ARENA, and
CHURCH.
1Press 34 to highlight the “3D”.
2Enter its submenu “REVERB MODE” by pressing 2.
3Press 2.
4Move the cursor by pressing 34to highlight the selected item.
➜ OFF: Play the disc under the original sound effect.
5Press ENTER/OK.
6Press 1 to return to the Audio Setup Page.
16