02Connecting up
Compatibility of this player with
This player is compatible with progressive video Macro Vision System Copy Guard.
Consumers should note that not all high- definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525/625 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard definition’ output (Interlace). If there are questions regarding our TV set compatibility with this model, please contact our customer service center.
This player is fully compatible with the complete line of YAMAHA products, including the projectors
Connecting to an AV receiver
To enjoy multichannel surround sound you need to connect this player to an AV receiver using the digital audio output.
In addition to a digital connection, we recommend also connecting using the stereo analog connection.
You’ll probably also want to connect a video output to your AV receiver. You can use any of the video outputs available on this player (the illustration shows a standard (composite) connection).
1Connect the DIGITAL AUDIO OUT COAXIAL jack on this player to a coaxial digital input on your AV receiver.
| DIGITAL IN |
AV receiver | (COAXIAL) |
| PB/CB | VIDEO |
PCM/q DIGITAL |
| L |
|
| |
/DTS/MPEG |
|
|
COAXIAL |
| R |
| PR/CR | |
| Y | |
DIGITAL OUT | S VIDEO | COMPONENT |
VIDEO OUT | AUDIO OUT |
Use a coaxial cable (similar to the supplied video cable) to connect the COAXIAL DIGITAL AUDIO OUT jack to a coaxial input on your AV receiver.
2Connect the analog AUDIO OUT L/R and VIDEO OUT jacks on this player to a set of analog audio and video inputs on your AV receiver.
AV receiver | AUDIO/ |
| VIDEO IN |
| PB/CB | VIDEO |
PCM/q DIGITAL |
| L |
|
| |
/DTS/MPEG |
|
|
COAXIAL |
| R |
|
| |
| PR/CR | Y |
DIGITAL OUT | S VIDEO | COMPONENT |
VIDEO OUT | AUDIO OUT |
• You can use the SCART AV connector, or the
11
En