Sylvania 6313CD TV Operation, Watching a TV Program, Picture Control, Game Mode, Degaussing

TV OPERATION

WATCHING A TV PROGRAM

1Turn on the TV/VCR

Press the POWER button to turn on the TV/VCR.

2Select the channel number

Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control.

Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.

PICTURE CONTROL

The TV/VCR’s picture controls – BRIGHT, CON- TRAST, COLOR, TINT and SHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image.

NOTES:

•Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled.

•When setting the Picture Control, the Game mode will be cancelled.

Make sure ...

•TV/VCR power must be turned on.

3Adjust sound

Press the VOLUME X or Y button to adjust the volume.

VOLUME 20

C C C C C C C C C C C C

1Select “PICTURE CONTROL”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to ”PICTURE CON- TROL”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING

BPICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

GAME MODE

This function enables you to decrease the TV screen contrast and making it suitable for use with a TV GAME.

NOTE: This function can not be set during recording.

Press the GAME button on the	GAME
remote control. “GAME” appears
on the screen.

When you press the GAME button;

•The TV/VCR comes on automatically if it is off.

•The TV/VCR will be in external input mode auto- matically.

TO CANCEL THE GAME MODE

Press the GAME button or CHANNEL K or L but- ton on the remote control.

DEGAUSSING

Magnetism from nearby appliances might affect the color of the TV picture.

If this happens, move this unit away from the appli- ance. If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes.

2Select item you want to adjust

Press the PLAY/K or STOP/L button until desired control is displayed.

BRIGHT CONTRAST

COLOR	BRIGHT
TINT	– P P P P P P P C P P P P P P P +
SHARPNESS

3Adjust the picture control

Press the F.FWD/B or REW/s button to adjust to your desired level.

	REW/s	F.FWD/B
BRIGHT	to decrease	to increase
	brightness	brightness
CONTRAST	to decrease	to increase
	contrast	contrast
COLOR	to pale	to brilliant
TINT	to purple	to green
SHARPNESS	to soft	to clear

•If there is a power failure of any kind, the unit will retain its memory for this feature.

- 14 - EN

9I03