45.SELECT Button
Press to switch TV/VCR and DVD mode. You can see the mode (TV/VCR or DVD) on the front panel indicator.
46.ANT. in Jack
Connect to an antenna, cable system, or satellite system.
47.Power cord
Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect to a standard AC outlet.
48.COAXIAL digital audio out Jack
Connect to the digital input of an external amplifier or decoder (for DVD audio only).
PREPARATION FOR USE
ANTENNA/CABLE CONNECTION
Satellite Box or
Cable Box (Not supplied)
OUT
IN
VHF/UHF Antenna (Not supplied)
From Cable System or | VHF Antenna (Not supplied) | |
Satellite Dish | ||
|
|
| |
From Cable | Coaxial |
|
System | Cable |
|
| (Not sup- |
|
| plied) | ANT. |
|
|
| |
| or |
| |
Cable (Not |
|
| |
|
|
| |
|
|
| |
supplied) |
|
|
|
|
| UHF Antenna |
|
| (Not supplied) |
AUDIO OUT | or | VHF/UHF |
COAXIAL | ||
|
| Combiner |
|
| (Not supplied) |
ANT. |
|
|
|
| [Fig. 4] |
| or | Flat |
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.
CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX
Use this connection if your cable system connects directly to your unit without a converter box.
By using this connection you can:
1)Use the unit’s remote to select channels.
2)Program one or more unscrambled channels for Automatic Timer Recording.
NOTE: This unit will ONLY record and view the same channel.
CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration.
By using this connection you can also record scram- bled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the unit’s remote control. Unattended timer recording is limited to one channel at a time.
Antenna/Cable Connections
Continued on the Next Page.
- 11 - | EN |
1C29