Sylvania 6719DE Selecting the MTS System, To Select Hifi Mode, To Select Mono Mode, VCR Audio

SELECTING THE MTS SYSTEM

Make sure ...

• The unit is turned on.

TO SELECT HIFI MODE

1 Select “USER’S SET UP”

Press the SETUP button on the	- TV/VCR SETUP -
	TIMER PROGRAMMING
remote control.	SETTING CLOCK
	B USER’S SET UP
	CHANNEL SET UP
Press the Arrow button K or L to	V-CHIP SET UP
	CAPTION [OFF]
	LANGUAGE [ENGLISH]
point to “USER’S SET UP”. Then	ZERO RETURN
	TIME SEARCH
press the ENTER button.	INDEX SEARCH
2 Select“VCR AUDIO”	– USER’S SET UP –
Press the Arrow button K or L to	RENTAL	[OFF]
point to“VCR AUDIO”.
	AUTO RETURN	[OFF]
	REPEAT PLAY	[OFF]
	B VCR AUDIO	[HIFI]
	TV AUDIO	[STEREO]
3 Select [HIFI]	– USER’S SET UP –
Press the ENTER button until	RENTAL	[OFF]
[HIFI] appears.
	AUTO RETURN	[OFF]
	REPEAT PLAY	[OFF]
	B VCR AUDIO	[HIFI]
	TV AUDIO	[STEREO]

4To return to TV mode

Press the SETUP button on the remote control to return to TV mode.

NOTES:

•Normally, “HIFI” should be selected for playback with HIFI sound.

•When you play non-HIFI tapes, the unit will play automatically in the monaural mode.

•The unit records automatically MTS broadcasts in HIFI stereo sound unless you select SAP mode recording before you begin recording.

TV/VCR

TO SELECT MONO MODE

You can change the selection to “MONO” if you want to listen to HIFI tapes in normal audio play- back.

1)Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”. Then press the ENTER button.

2)Press the Arrow button K or L to point to

“VCR AUDIO”.

3)Press the ENTER button until [MONO] appears.

4)Press the SETUP button on the remote control to return to TV mode.

TO SELECT STEREO, SAP, OR MONO

1 Select “USER’S SET UP”
Press the SETUP button on the	- TV/VCR SETUP -
remote control.	TIMER PROGRAMMING
	CHANNEL SET UP
	SETTING CLOCK
Press the Arrow button K or L to	B USER’S SET UP
	LANGUAGE [ENGLISH]
	V-CHIP SET UP
point to “USER’S SET UP”.	CAPTION [OFF]
	TIME SEARCH
	ZERO RETURN
	INDEX SEARCH
2 Select “TV AUDIO”	– USER’S SET UP –
Press the Arrow button K or L to	RENTAL	[OFF]
point to“TV AUDIO”.	REPEAT PLAY	[OFF]
	AUTO RETURN	[OFF]
	VCR AUDIO	[HIFI]
	B TV AUDIO	[STEREO]

3Select [STEREO], [SAP], or [MONO]

Press the ENTER button until [STEREO], [SAP] or [MONO] appears.

4To return to TV mode

Press the SETUP button on the remote control to return to TV mode.

NOTES:

•You must select the recording mode,either TV AUDIO [STEREO] or [SAP] when you record a broadcast.

Refer to “MTS RECORDING/MONITOR MODE”.

•If you select [SAP] when second audio is not avail- able, the unit will record normal audio.

•The unit records automatically MTS broadcasts in HIFI stereo sound unless you select SAP mode recording before you begin recording.

- 24 - EN

1C29